A Whirlpool Bath can come in many shapes,colours and sizes, we specialize in the supply of bespoke baths made to order at our UK factory, we supply standard whirlpool baths (1700x700mm), offset corner baths (1500x1000mm), large corner baths (1400x1400mm), double ended baths(1700x750mm Plus), large baths (1800x900mm Plus), and deep soaking plunge tubs (1050x750mm Plus).
How they work?
Whirlpool baths are operated by air and water. The suction of the whirlpool takes the water from the bath and into the pump. The motor then uses air to pump the water around the pipe work and out of the jets. Please Note: All the jets can be turned on and off individually. With the jets turned off, fill the bath with water, turn the whirlpool system on, and turn the jets clockwise.
How they are made?
All baths are fully manufactured before being sent to have a whirlpool fitted. All the pipe work for the whirlpool is then fitted to the bath and connected through the motor. The motor is operated by a pneumatic push button, and it also requires a supply of 240V, 13 amp, live, neutral, earth (additional exponential earth located on the side of the pump). Please Note: The exponential earth connection to the motor is in addition to the supply cord and must be carried out.
How to look after them.
How to look after them?
Whirlpool Baths should always be cleaned after use, preferably using our tried and testedwhirlpool sterilizing tabletsthen on a 6-8 week basis depending on usage aspecialist whirlpool pipe cleanershould be used. We recommend you dont use ordinary bubble bath, we have specially formulatedlow foaming bath oil'sandbubble baths availableto purchase from our shop. The film of insoluble soap products and grime that will otherwise harden on the side of the bath is easily removed at this stage buy rinsing with warm water and a soft cloth. In hard water districts, insoluble lime salts are deposited below the waterline and under leaking taps. If this deposit is allowed to build up, it becomes increasingly difficult to remove, and looks unsightly. Prompt cleaning is again the answer. Hot soapy water and a cloth should be used and then the bath wiped dry. Abrasive cleaners MUST NOT be used on chrome or gold plated fittings.
