Cleaning and caring for your whirlpool bath

Is your bath really clean? How about the pipework? Whirlpool pumps and damp, humid pipes are a natural haven for bacteria, dirt and grime. Bath deposits such as soap, shampoo and hair can build up within the pipework and are all ready to return the next time you use the bath. Follow our top tips to keep your whirlpool bath clean and fresh.

Low-foam bubble bath for whirlpool tubsStick with low-foam bubble baths for use in your whirlpool bath. Traditional bubble baths combined with a whirlpool can create more bubbles than you bargained for!

After each use, clean off any residue in the bath with hot, soapy water and dry with a soft cloth. Jets should be cleaned with a cotton bud or small washing up brush to remove any grime around them. Especially in hard water areas, regular cleaning is essential to prevent the build-up of ugly limescale deposits.

Once every 6 weeks or so, clean the jet system out fully using Whirlpool Bath Cleaner:

  • Fill the bath and run with cold water, with the air control off
  • Run for 10 minutes; ensure the room is well-ventilated
  • Empty the bath and refill and then rinse

This should stop any build-up of bacteria within the jet system and keep your bath and pipework fresh. Don't use ordinary household cleaners or detergents, as these can harm your system as well as your skin.

Never use abrasive cleaners on acrylic baths or on chrome or gold-plated bath fittings: you'll spoil the beautiful finish. Bleach can also damage the surface of baths, so always choose cleaners that are specially formulated for use on acrylic baths. Or for a truly budget solution, make your own from a mixture of half vinegar, half warm water: this is great for removing mild rust and hard water stains.

The real key to maintaining a beautiful fresh whirlpool bath is regular care and prompt cleaning. Don't let dirt, grime or limescale build up, and you'll have a luxurious bath to sink into for many years to come.

Share this post:
  • email
  • Print
  • del.icio.us
  • Digg
  • Facebook
  • Google Bookmarks
  • Twitter

One Response to "Cleaning and caring for your whirlpool bath"

  1. [...] This post was mentioned on Twitter by Whirlpool Bath Shop, Jane Bell. Jane Bell said: RT @WhirlpoolBathUK: New blog post: Cleaning and caring for your whirlpool bath http://bit.ly/8Fb4wA [...]

Leave a comment