William CastanedaNice Jacuzzi, good power on the air and water jets. Chromotherapy light was a good addition. Delivered on time. Side panel very week. The bath has problems after turned off as it reinitiate itself after 15 minutes or so without water inside. It has to be turned off completely by the breaker that is located hidden outside of the bathroom, what is a pain. We raised that and other couple of questions to customer service 2 months ago, but patiently wait but no answer yet.
AnonymousGreat product, easy installation. Delivered on agreed date and on time Thank you We love it 🙂
Free Chromotherapy Light | Limited Stock
For a limited period each bath will be fitted with a free fade chromotherapy light worth £179.98.
Artesan Regent Corner Bath
If you would like a different whirlpool system please contact us for a quote, all baths are manufactured by us at our UK factory. Lighting and air spa upgrades are also available, select below, any upgrade will be automatically added to your bath, fully fitted and tested.
We aim to deliver your bath within 5 - 7 working days
By Phone:- Please ring 0800 028 6174 or 01489 797 130
By Email:- firstname.lastname@example.org
Live Chat:- Send us a message or chat live to customer services
Enter your question below
All electrical connections must MUST be carried out by a qualified electrician and electrical wiring and ancillary equipment must conform to British Standards and CE.
The power supply can run from 2 sources:
Source 1: From the main circuit board run correctly sized twin and earth cable to a residual current circuit breaker (RCCB) situated outside the bathroom. Continue the cable into the bathroom and connect to pump. (RCCBs can be purchased through ourselves: specification 25amp 240v AC 30MA trip).
Source 2: From your socket ring main (13 amp) run correctly sized twin and earth cable to a residual current circuit breaker (RCCB) situated outside the bathroom. Continue the cable into the bathroom as above. Please ensure that the fuse in a fused spur is 13 amp for all pumped whirlpool systems. Should you have an air spa only system then a 5 amp is sufficient.
If you have chosen a dual system with air spa, the blower provided is positioned in a convenient place on the floor and the blower hose and pneumatic tube attached. The blower can then be connected to the same 13 amp fused spur as the pump.
For our electronic systems with pre-fitted touch pad, all appliances (pump, blower, light etc.) have been pre-wired and tested in the factory before dispatch. The mains cable (pre fitted) must be connected to a 13 amp fused spur.
Chromotherapy lighting can be connected to the lighting circuit if convenient or a separate 3 amp fused spur should be provided for the light.