Shopping basket

Free Delivery On Most UK Mainland Orders
Expert Advice We're Here To Help!
Secure Shopping Shop Safely With Us
5* Reviews Our Customers Love Us

Frequently Asked Questions & Useful Tips

WHIRLPOOL SYSTEM. Must be fitted to a 13 amp fused spur connected outside of the bathroom by a qualified electrician.

AIR SPA SYSTEM. The blower is supplied loose and is designed to sit on the floor in a convenient position to enable removal when necessary. The blower is connected to the flexible pipe by means of a hose clip or cable tie. There is a length of clear pneumatic tube that connects to the chrome on/off button and to the vacuum switch in the body of the blower.

DUAL SYSTEM (WHIRLPOOL AND AIRSPA). The 2 supply cables from the pump and the blower can be connected to the same 13 amp fused spur. Please check with your electrician.

LIGHTS. The power to the light is converted from the mains supply to 12v current and this is done in a transformer box. The cable to the transformer box (red for live and white for neutral) should be connected to a 3 amp fused spur or into the lighting system if convenient. 

CHROMATHERAPY LIGHT OPERATION. Should be pressed on and then off. Each time this will stop on one of the seven colours Green, Orange, Red, Violet, Blue, Yellow and Indigo. To start the fade programme, the on/off touch should be pressed for 2 seconds.

ON/OFF CONTROL. You should press the button in the centre of the chrome on/off to t urn the system on and again to turn off.

AIR CONTROL. Should be turned around to adjust if gentle when turned off (only water circulation) or open to the required level allowing air to mix at the jet with the water (Jacuzzi effect) giving a more vigorous massage.

CLEANING & MAINTENANCE. In order to maximize the efficiency of your system and for hygiene purposes, a whirlpool cleaner must be used on a regular basis (we recommend every 4 to 6 weeks). After each use a sterilising tablet should be used. Household disinfectants and bleaches are not recommended as they could cause damage to the pump. Please see our leaflet ‘Oils and Cleaners’ that was sent with your order confirmation.

BATH INSTALLATION. Your bathroom installer will plumb in the bath in the normal way, connecting the hot and cold supplies to the taps or bath filler, and the waste to the household drainage system.

BATH PANELS. Your bathroom installer will adjust the bath height (by means of the adjustable feet) to the height of the panel.


Trojan Plastics - 01484 648181

Carron Bathrooms - 01324 638407

Aquaestil Baths - 0800 376554

The Whirlpool Bath Shop is rated 4.8 stars by based on 943 buyer reviews