Robert HirstGood quality Bath, and arrived when promised. Make sure you fill the bath with water prior to final installation, we had a small leak , but it was easily sorted. The taps did not function properly after a couple of days, this was not the fault of the Whirlpool bath shop but the tap supplier ( Hudson Reed) who sent a replacement part. The problem about that was the that the bath was fitted and installed, so it had to be taken out again, at a cost of £400. Sounds a lot to fix maybe, but the bath was fitted snug to three walls with tiling down to it, so more work than usual to fix. Guess what, the tap company was not interested at all in helping out with that, but all said and done, the bath is fantastic.
Jeremy MatherThe bath is fabulous, the only issue was the delay in delivery but I understand this was due to their supplier initially sending the wrong bath. It would be nice if the light was powered through the control box as the fitter missed the separate wire img and so the light cannot be made to work without a major rework of the bathroom.
Kubix Square Wall Mounted Basin-Bath Filler Tap.
Hudson Reed Kubix Basin - Bath Filler Tap
Square Wall Mounted Basin-Bath Filler Tap
Comes with Ceramic disc technology
Suitable for Low water pressure system
Requires minimum 0.1 bar water pressure system
Conform to BC254/0207, EN200 and/or WRc/NSF standards
Delivered free with your new whirlpool bath. If bought separately they will be sent by carrier, a signature will be required.
Visit our Contact Page
Enter your question below